Sunday, 14 April 2013

Analyse this!

While debugging AR80 I needed to attach the logic analyser semi-permanently. I came up with a shield stacker which has pin header posts soldered at a jaunty angle.

These are just the usual long-legged sockets with smd-type pin header attached so that the spacer bar rests on the base of the socket part.
This pushes the header pins out at a slight angle, allowing the analyser cable to attach without fouling on the shield itself.
at

5 comments:

  1. Steve Smith15 April 2013 at 02:21

    Great idea. I'll have to make myself some of these when my LA arrives (eventually).

    ReplyDelete
  2. Steve Smith15 April 2013 at 02:22

    This comment has been removed by the author.

    ReplyDelete
  3. RandomHobbyGuy16 April 2013 at 03:15

    What LA are you using? I'm looking to replace my gigantic hp 16500, its just too massive

    ReplyDelete
  4. SirMorris16 April 2013 at 03:45

    I have one of the Salae Logic ones. It's a great bit of kit for its size. It's convenient to use but if you need bigger, faster, wider then I also have an Openbench Logic Sniffer. I've modded it for 32 channels and it does the job - nice triggering.

    Prime has a different one, more expensive than either of these but he swears by it.

    ReplyDelete
  5. RandomHobbyGuy16 April 2013 at 06:37

    Ill take look I think. Would need at least 24 channels.

    Cheers

    ReplyDelete

Play nice :)